All mechanical functions: shafts, bearings, tower assembly, back, brakes, pedals side, tilt, leg, kidney bridge, Trendelenburg, flex have all grease removed and re-lubricated with high grade oil. Sand, prime, and paint all parts as needed. Buff all side rails and head, kidney, back seat, leg tops, side covers, base cover, tower covers. Body work done as needed.
Table is then assembled starting with the base once all components are ready. Pedal assembly is first to be attached to base, then brake mechanism, making sure that pedals move nice and smooth. Assemble rest of base components, tower and top. Mechanical adjustments are made during the process. New Hydraulic oil (recommended by Manufacturer) is used doing this process. Once table is completely assembled , hydraulic adjustments are made using pressure gauge. All functions are run to be sure the oil pressure is correct. Weight is put on the table overnight to be sure the main cylinder is holding height. All mechanical functions are run to check for smoothness and stability.
Cycles are run with a person on the table. Before the locking side panel and base cover , there is a check for leaks. Table is moved from one place to another to make sure casters move freely. Check for correct oil level. |
